About this 3D model

if you have a laser cutter this is for you! Dont Worry A Printable Version Is Now Avilable, The Board Itself Is Called The "Luffar Shack" the main board was laser cut and engraved the color red is "cut" and blue is "engrave" i then printed the pins and feet which need to be glued in place and made the counters and crosses if you intend to make your own counters the holes that the counters fit into are 16mm diameter i recommend making a 6mm diameter x 3mm hole for the neodinium magnets my model is modded with screws you could do the same