About this 3D model

This quick and simple paper towel holder print needs a 3/4in pvc pipe, with a screw on either end. I used M3 nuts and bolts but really anything that will fit through the keyhole can be used to secure the assembly. By simply putting the pipe and screw through the keyed hole in the model and twisting you can secure the pipe in place. You can use either adhesive or the 3mm mounting holes and screws to hold the arms below or above whatever surface you wish. I would recommend that this is printed with atleast 60% infill, but feel free to up that number to make it stronger. Also dont forget to print two of them.