About this 3D model

This model has been popular for many years because it is simply nice.After moving to new flat, I was looking for something original on the bathroom mirror.I printed the original and ... His arms fell off quickly. So disapointent...My wife said she only smacked it slightly ... Yes, of course. I belive ;) I decided to improve the structure. And so began the adventure with Fusion 360 to create an almost whole project from scratch. Source: https://www.thingiverse.com/thing:2467601 Notes: Do not rush. It is simple. This model requires high accuracy, so leave high speed for other projects. I did not exceed 50 mm / s, and sometimes I printed even slower.The smaller the model, the lower the temperature and the speed. Instead of describing everything, I decided to take more pics. There you have shown what, how and in what order to assemble.Some holes require calibration with a drill - this is pretty normal.You can use files and small upholstery knives. I tried to give good tolerances but I do not guarantee matching the parts straight from the printer. It is simply impossible. Aha, something else... Personally, I did not stick my arms and hands to the main body.I made them pressed, so that they can easily be replaced after breaking. I have printed parts in many colors with the 'change filament' function in Cura.Mean 'solar panel', 'front door' and 'b_w stripes'. It's much easier than - for example - fitting a yellow star into the hole of solar panel. Enjoy :)