About this 3D model

# Pi3 Simple WallmountI needed a simple wallmount for some Pi3's to mount in my closet and under my desk(s), so I made this little low cost and time mount. Had great prints on 1, 2 and 3 mm so far, but I will still tweak it a bit. I've got this Design (see v2) on my GitHub page. ## DescriptionThe mount has tapered cutouts on the along it's width and length, for easy mounting (and fillament reduction). You can use the external mounting points aswel, as this gives you more access to the Pi3 before mounting it on the wall. Let me know what you think ^^ ## Information /* Simple Pi3 (wall)mount. Measurements are in mm. Author: gn0mish@protonmail.com #!yaml mount: usage: grams: 7 time: '35 minutes' misc: screws: size: '2mm x 10mm' amount: 8 printing: settings: layer height: 0.2 infill: 8 infill pattern: 'zig zag' speed: '30-60' adhesion type: 'skirt' material: pla_0: print temp: 205 bed temp: 63 vendor: anycubic pla_1: print temp: 205 bed temp: 63 vendor: https://www.123-3d.nl petg: print temp: 240 bed temp: 80 vendor: https://www.123-3d.nl*/