About this 3D model

The picture shows the Elephant-single-1.stl. If somebody want to print exactly the same. I made the ears & co a little wider at the Elephant-single-2.stl, so they should be printed at 100%. (It should look the same as the multi-print, see last picture). This one is printed:x70%, y70%, z100% (133mm x 104.70mm x 5mm)20% infillLayer change: 2.15 first (14); 3.20 second (21); 4.10 third change (27). (The last picture shows the single print (70%) and the multi color print (100%) together.)