About this 3D model

I needed something that could hold a few bits related to gutting locks as well as lock picks. So I made this. The large space on the top left is made for this wonderful set of plug followers (and its stand) that can be found here: https://www.thingiverse.com/thing:4851507 The bottom left slot was made to hold a eurolock (70mm) that I had modified for easy re-pinning. Next to the euro lock slot, theres a few holes, 2 originally designed to hold some disc detainer rotator tools such as this one: https://www.thingiverse.com/thing:5197004 as well as a hole to hold some re-pinning tweezers, such as the UK Lockpickers tweezers, or some 3D Printed ones, such as https://www.thingiverse.com/thing:4235613. On the bottom right, you have a slot for Sparrows cutting tool. And finally on the top right, you have plenty of slots to hold lockpicks and/or turners. You can even print an additional side platform that can be attached on the right, that can fit this Altoids cabinet for all your spare parts: https://www.myminifactory.com/object/3d-print-altoids-cabinet-145182 Some measurements can be seen in the screenshots. Very happy to see peoples prints! Hope this model will be of use! EDIT: For smaller printer bed sizes, I added some files where I halved the main gutting station and added some locator pins. I didn't print this version so I am not 100% sure it works, though I would recommend using the pins just to roughly locate the 2 parts together, and then glue the entire surface to keep things sturdy.