About this 3D model

Skull Head for wall art decoration made via Hueforge. Colours are included in 3mf file (made in OrcaSlicer and BambuStudio) but can be adapted according to your needs. The stl file is also included if you want to make your own experiment. It was printed with a 0.08mm as layer height and 0.16mm for the first layer, and 100% infill with rectilinear pattern. Don't forget to upload your make! Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Muted Blue Transmission Distance: 0.3 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Sakura Pink Transmission Distance: 2.8 PLA PolyTerra Pastel Peanut Transmission Distance: 0.5 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Lava Red At layer #9 (0.8mm) swap to Muted Blue At layer #10 (0.88mm) swap to Sunrise Orange At layer #12 (1.04mm) swap to Sakura Pink At layer #15 (1.28mm) swap to Pastel Peanut At layer #16 (1.36mm) swap to Cotton White At layer #22 (1.84mm) swap to Savannah Yellow for the rest.