About this 3D model

EDIT 11/24 Thank to all the comments i've removed the need of support and resized the cap so it will fit like a charm -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- An upgraded model of my original silica dryer spool. after a lot of testing and a lot of reviews and advice i've redisegned the spool to Dry out the silica gel that all of us use in the AMS or in the spool to dry out the filament. this version reduce to 0 the mess done with the silica and has 0 leak. the hole in the spool now are 0,8 mm so it can fit also the silica gel i'm using now that is 1mm of diameter. There are 2 version: “normal” won't fit the AMS, "little" will fit the AMS (quantity of the silica that can hold is the same) BOTH version works with the SUNLU FILAMENT DRYER S1, S2 and S4 simply put one half on the other trough the pin (adding some glue is better), add the silica with a funnel (you can use the model i designed) https://makerworld.com/en/models/53330#profileId-55104 and put the screw cap on. dry out our silica gel it's never been easier! enjoy!