About this 3D model

Panzer IV F2 1942 you can make at least 3 different versions Panzer IV F2 extremely detailed model with great historical accuracy DESCRIPTION Panzer IV F2 The Germans directly increased the thickness of the hull plates on the F version, thus eliminating the need for additional armor plating. The resulting thickness, however, was less, at 50 mm at the front and 30 mm on the sides. To better withstand the stresses caused by the increased weight, the running gear was also improved. The main difference between the F and F2 versions is the main armament. The old gun is replaced by a gun of the same caliber, but with a longer barrel, the 7.5-cm KwK 40 L/43, which thus fires higher-velocity projectiles more accurately. Armament : o 7,5 cm Kwk 40L/43 o two MG-34 7.92 mm machine guns depending on the model (from 2,400 to 3,150 rounds) The models : Model only tested and intended for resin printing at 1/56 scale.The models are hollowed out to save resin.Total weight of the most complete model: 55gFile contents: Panzer IV F2 31 unsupported stl files, 31 supported stl files The 31 stl files contain: 1 hulls1 turret2 cupola, 1 open, 1 close3 left turret hatches: close, open front, open rear, you need mirror for the other side.2 hull hatches, one open, one close2 KwK 40 L/43, one with antenna, 1 without4 mudgard, 1 front high and 1 front low, 2 for rear; left and right15 optional stowages1 left tracks, you need mirror it for the second.Counlane models.