About this 3D model

Summary This is an remix of the Oventrop adapter by DerEnderKeks but with an M32x1.0 thread. Print Settings Printer: Bambulab X1C Rafts: Yes Supports: No Infill: 15 Filament: Bambulab ABS or PETG-CF Notes: Use tree support to make removing the support easier, or print upside down. Usage/Installation Insert the pin Insert the pin from the inside of the adapter and push it through the hole. Install to radiator valve Mount it using a pipe wrench (makes it easier to screw it on when you are mounting it for the first time) to the valve. Make sure that the pin is still inserted. Install a regulator Now you can screw on (probably) any thermostat/regulator that requires a M30*1.5 threading.