About this 3D model

Summary Simple Galaxy Tab A wall mount to allow for charging and music while mounted on the wall in a case still. Done in 2 pieces for smaller printers to be able to complete. Needs supports in some areas depending on orientation I printed this with the Screw tabs on the build plate. Sized for 8g screws. Printed in PLA+ with 20% infill and 3x3x3 for top, bottom and walls. Tree supports worked well. Step files included so you are free to modify to suit just add as a remix please. This isn't fully refined just general use print like many of the others. Print Settings Printer Brand: Anycubic Printer: Kobra Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Filament: Esun PLA+ Black Notes: Printed in PLA+ with 20% infill and 3x3x3 for top, bottom and walls. Tree supports worked well. Could be done with some design revisions to remove need for supports but I only needed a set of these so project closed off and moving on. How I Designed This Design process. Nice simple one. Measured all the needed dimensions, looked for one that had been designed before and came up empty. Opened Onshape and in 15 minutes knocked this out with rectangles, semi circles and some fillets.