About this 3D model

Calvin & Hobbes Let It Snow! For Your Doors. Use some sticky stuff to keep in place if needed - I didn`t. The Cover-/Profile Picture shows my Print with Bambu PLA Tough White. You will get away with any other white PLA on this one. Don`t let the strange looks in the “Prepare”-Window confuse you. As soon as you slice you see what it will look like in the “Preview”. Profile AMS-ready, only two Colours. A1 Mini included. Easy without AMS, just one swap at 13: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Tough Cream White Transmission Distance: 10 Swap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Cream White for the rest. Added STLs for hueforged Version starting with Black. This one takes longer to print but the lines come out so clear - it`s almost like the drawings, especially if you use Bambu PLA Tough White as its transmission distance is high. Classic Version starting with White. You can use any White PLA for this one. Faster Print. This is also done in hueforge but as a negative, meaning it has a classic white background with thick black lines on top, some detail of the original drawing gets lost but some of you might prefer it. Bill Watterson, Creator of Calvin & Hobbes, Thank You! Note: This is Fan Art. Original Drawing didn`t let these snowman-heads fall down your door, they were aligned in the snow.