About this 3D model

This is a small, inexpensive CoreXY mechanism which illustrates how CoreXY works. When the user turns the two knobs in the same direction, the X axis moves. When in opposite directions, the Y axis moves. This is purely for illustration purposes, there is currently no attachment for a pen or pencil (nor laser nor extruder). However, the concepts learned from this can lead to scaling up and improvements and the addition of stepper motors. Required:4 x 3mm by 100mm aluminum rods (or other material may work)1m GT2 timing belt 6mm (this is overkill, a thinner belt should work)6 x 3mm x 25mm (or longer) screwsTo print:1 x Inner bearing2 x Outer Bearing1 x Frame4 x Spacers8 x Spindles2 x Control knobsOptional:2x Belt Connectors I used PETG but any material should work.I used 20% infill but use 65% to be sure, it doesn't take much longer to print. Here is a video of it working: https://youtu.be/tElMsCfxDCs