About this 3D model

Give your mini's the the height they need to be the best watchmen they can be with our Space Orc Watch Towers. Or...mimic your cities odd choice of "art" for the public park. These towers appear to have been haphazardly thrown together with scrap metal. And with the development of rust, perhaps they were never expected to last very long. Some things to note about the Space Orc Watchtowers: Each tower is composed of two pieces: A platform and legs. Each platform comes in two parts, and each set of legs comes in two parts. The complete platforms and sets of legs (Watchtower 1 & 2) are interchangeable, creating a degree of modularity. There are four possible combinations of platforms and legs. The banners print separately and can be attached to the towers using the Banner Holders. The poles have one side that is flat. This side is meant to attach to the sigils. There are four different sigils and three pole lengths. Longer or shorter poles can easily be made by scaling in the user’s slicing software. Sigils can also be scaled up or down. Check out our website, www.terrainify.com, for painted pieces, painting tutorials and other gaming content! You will receive a zip file containing the STL files to print Space Orc Watchtower 1, 4 sigils, 3 pole lengths, and attachment pieces. Watchtower prints in four separate pieces; two legs, top, and bottom. Approximate Dimensions (LxWxH): Tower: 4.5" x 4" x 5" Sigils vary but each approximately 2" x 1.5" 3 pole lengths: 70mm, 85mm, 100mm Recommended layer height: 0.15 - 0.25mm Recommended infill: 5-7% All files are scalable and supportless.