About this 3D model

Description PDF Supporters Version now Online and includes these over the Basic version access to more options and design customizations direct help from me if you require any additional addons (within Reason) some STEP files for personalization MY DIRECT APPRECIATION for helping me fund more designs and prototypes for the community Easy to print Keychain and Display Pegboard Hook Holder Premade supports for the Bottom you can either remove them or keep them as part of the sealed base its up to you! Uses standard 1" spacing /w 6mm hook diameters Hollow bottom for you to add weights like BB's or Pellets (supports included in design) Hardware needed: x2 M3 Heat inserts or 1/2" Screws per Spinner bottom Pellets or BB's 2.5x1mm Zip Ties 10 or 12x3 or 10 or 12x4 magnet (top cap for price tag options) 1" Wood doweling (height is up to you but recommend no more then 2 stacks tall) 1" spacing hooks x 5.4mm or less pegs (recommended to not go longer then 6") Base has a Diameter of 154mm (6") 3D PRINTING SETTINGS Voron Spec: (Recommended) 4/4 Top/Bottom 4 or 5 walls 20-25% infill Minimum Settings: 4/4 Top/Bottom Layers 3 walls 10% Infill This is the basic version, for extra parts or new addons they will only be available through the Paid version of Printables, Cults3D or Patreon If you enjoy these designs please consider purchasing the files off Cults3D or buying me a coffee as every dollar gets put back into more designs and creations! https://www.printables.com/model/543028-pegboard-hook-display-spinner-supporters-edition https://cults3d.com/en/3d-model/jewelry/pegboard-hook-display-spinner https://www.patreon.com/JTCreationsCA