About this 3D model

I designed these 2x2 and 2x4 Bricks to accept a magnet so you can use them as fridge magnets! I made 2 variants: Option 1: The magnet hole is open. You can press fit (or glue) the magnet inside after you have printed it. Option 2: The magnet hole is closed. You can pause the print before the hole closes and drop in the magnet and resume. The pause is built in to the printing profile. I used cheap magnets that are 10mm in diameter and 3mm thick, but you can use other sizes. Check the link for the magnes I used. https://www.amazon.nl/gp/product/B07D37D3CY/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Print them in some funky colours and slap them on the fridge! Have fun with your magnets! Show me what you do with them!!! If you make them, please post it!!!