About this 3D model

Summary I have been granted permission to use the TED logo from Gamlyn Games for this project. This is, fan made functional art, it is not an official product. This is a dice tower for use with tiny epic dungeons. It has a tray at the top to store your die results while you debate about changing the faces. This tower will pint-in place on a well tuned ender 3 with the stock nozzle and cooler, but this is very dependent on filament and print settings. I have included my Cura profile that I use to print these. To use this profile in Cura go to, Profile, Manage Profile, and Import, choose the cura profile I provided. This will add it to the list of profiles: I have had sucess with Zyltech and Solutech Filaments using the provided Profile. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .3 Filament: Zyltech Pla Castle Gray Notes: You will need to place manual supports under the Door Opening. You will need to download the plug-in for custom support in the Cura marketplace. I have included a Ender 3 Pre Sliced Gecode, PRINT AT YOUR OWN RISK! It will print on an unmodified ender 3, but if you have made changes to bed size, nozzle, added auto leveling, ect.... you will need to monitor the printer if using the pre sliced gcode to insure things don't collide again USE THIS AT YOUR OWN RISK. This takes around 20 hours and uses 242 grams for filament if using my Cura profile. Layer height .3 Line Width .6 top and bottom layers 2