About this 3D model

This is a significant remix of the “Big Santa LE90S Inspired ” Files by Quist on Printables (https://www.printables.com/model/329527-big-santa-l3go-inspired) (who was inspired by others as well) This guys is about 20 Inches tall ( 19.5 inches give or take your measuring tape These were actual individual files without a print profile. I arranged for the optimum print bed size to avoid height issues with bumping prints as well as maximizing print space and time. Also played with and tested infill/ walls to ensure good structural integrity and ease of removing supports. I pre-painted plate 2, 4 & 6 items as well to save others time (you can always change those colors easily) About 38 pieces to include extra connecting pins JIC Total time for all pieces: approx 47 hours and 40 min Plt 1- 10 hrs 58 min Plt 2- 8 hrs 16 min Plt 3- 10 hrs 32 min Plt 4- 4 hrs 52 min Plt 5- 7 hrs 2 min Plt 6- 10 hrs 48 min Plt 7- 4 hrs 9 min P1P/ Bambu Basic PLA (I turn off Aux fan but the file profile has it on at 20%) P1P / .04 / Textured PEI .2mm Iron topmost surface Classic walls 3 wall loops 3 top shell 3 bottom shell 10% Gyroid infill Prime tower enabled : Normal /Snug Threshold 5 Brim/Bed Adhesion: Outer Brim Only /Brim width 4/Brim object gap .35 flush into infill/object turned on for Pegs on plate 6 (that can be unchecked if you want) First layer filament seq.Profile is set to Auto but can be changed to whatever as plate 6 is the only multicolored print and print seq is not likely to cause issues