About this 3D model

3D MODEL DESCRIPTION Joker clock is made up of an external disk with the numbers and an internal disk with the image, the internal disk can be replaced with different images, I intend to upload them in the future, the clock is also complete with printable hands. Joker clock printed in color, the color change of the printer can also be used, it does not require AMS or MMU, in the slicer program set the color change to the recommended height. add a negative cylinder(if you use a different mechanism) to the Centre of the clock to create the correct size hole for your movement or alternatively drill the required size hole. this is the mechanism I used: https://amzn.to/49jUvUC 3D PRINTING SETTINGS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Red At layer #7 (0.72mm) swap to Green At layer #12 (1.12mm) swap to Gray At layer #19 (1.68mm) swap to White for the rest. if you want to change the color of the numbers and border make another color change If re-scaling model make sure not to alter the Z height of the model