About this 3D model

Revised model and print profile. Some stability optimizations on the model and the profile itself. Do not worry, all connections fit as usual. (02/25/2024) Angle connection 90° added (02/24/2024) Added new connections (02/23/2024) Version with a maximum height of 249mm for Bambulab printers is available! (11/29/2023) Vacuum valve 100% from the 3D printer is now available (06.01.24) https://makerworld.com/es/models/126731#profileId-137035 A cyclone separator for the workshop. Separates the coarse dirt into an extra barrel/bucket. This is specifically designed for the connections of Bosch and Fein cordless vacuum cleaners. Since the associated adapters are only glued in later, an adapter can also be made for any other hose. The connection with the slant (inside) is for the bottom connection (horizontal). Here the dirt is sucked in towards the cyclone. The other connection goes on top and leads to the vacuum cleaner. No additional screw connection necessary thanks to the attached thread. It should only be sealed with silicone or something similar. A vacuum valve to prevent the container from imploding would be useful. The material for me was PLA+