About this 3D model

Demonstration, assembling guide, print settings and important information can be found in this YouTube video:https://youtu.be/YQdnXikHZGE This is a replica of the LAS-58 "Talon" from Helldivers 2 capable of firing nerf darts. It is fully mechanical and does not use electricity or springs to fire - it is powered by rubber bands. The cartridges each have an internal rubber band, which can send darts flying approximately 10 meters away. A fun and simple DIY project! **If you don't have a 3d-printer, then no problem!**You can buy a physical replica here: https://ko-fi.com/s/cdb3f592b9 **Only rubber bands and filament is needed!**The model does not need extra parts like screws, nuts or springs. The only extra parts that are needed are:[1mm thick exercise rubberbands](https://www.amazon.de/-/en/dp/B0DKC1VDKX?ref=ppx_yo2ov_dt_b_fed_asin_title)Rubber friendly lubricant (like silicone spray) is recommended, but is not needed. Printing the springs in PETG (over PLA) is also recommended, due to PETG's better resistance to creep. **No big printer is needed**This model was printed with an A1-mini with a build volume of 180*180*180mm, but the barrel will need to be split (it is 21,8cm long) **Straight forward assembly**The assembly is super easy and primarily consists of just plugging objects together. Every file for the objects are logically named with color, quantity and purpose of the object - which eases the assembly. **No multi-filament system is needed**The multi-coloured model is split in colours, so you don't need to use a mutli-filament system (like AMS). If a part is missing or there is an issue with the model, then feel free to contact me and I will resolve the issue quickly :) This model is strictly for personal/private use only - not commercial. Distribution of files is prohibited. You may need to paint/print the barrel tip orange to comply with your local laws.