About this 3D model

Redraw to add an angle so the fans point at the bed when using kinematic bed mounts. Use standard Voron settings to print. I am running my fans a 30% during warm up and then 60% after. Top of my chamber is hitting 63, bottom around 50 Link to OnShape Project https://cad.onshape.com/documents/32c1316f724cb79bed268d9f/w/57083890b65fd8d6e3c43901/e/e12a64fd719a87ee0bfe0223?renderMode=0&uiState=65358e1194ec370fa1423fef