About this 3D model

A simple planter that I designed for my daughter. it's designed to be printed in "double wide" vase mode. But will, print fine in standard vase mode. Double Wide vase mode is simply setting your perimeters to .8 for a .4 nozzle or 1mm for a .5 or .6 nozzle. and bumping up your extruder temp by 5 Degrees or so. Most printers will print at 25-30mms in this set up. Remember, by default in Cura your default wall/perimeter speed is 1/2 of your printing speed. So 60mm second = 30mms wall speed. and wall speed is what we are wanting at 20-30mms.