About this 3D model

Elegant and sturdy drawer box with snap closure for Skat and similar playing cards. There are 2 variants of this box - with and without imprint. Please print in the specified orientation, with a layer height of 0.2 mm and a line width of 0.4 mm or more. Do not use a different layer height as the snap closure is specifically designed for the mentioned layer height. I made the snap closure extra strong to prevent accidental opening - for example in a travel bag. If it is too strong, you can smooth out the snap spots in the frame with a nail file (see last picture above). If you have thicker fingers (like me), you automatically push the frame apart a little in the middle when you pull the drawer, which makes opening the snap lock much easier.