About this 3D model

This is the most unique thing I have experienced so far in my time with 3D printers. It's just a lampshade like any other, BUT with this special filament, every lamp looks different. If you use a normal filament, it looks like the one marked "normal/test" in the picture. If you use " the filament PLA clay white ", every lampshade you print will look different (see picture marked with 1, 2 and 3). I am so fascinated by it that each one shown is now hanging in one of my rooms. xD You can achieve beautiful effects with a smart light bulb and the different brightnesses. It emits a cozy light. No normal filament can keep up with this comparison. That's enough of my rhapsodizing, I'll let the pictures speak for themselves. The technical part: - set the specified values (shown in the pictures) manually if you don't use Bambu/Orca Slicer - Activate vase mode - use a 0.6 nozzle, so you achieve a stable body - use the quality settings as shown in the picture - nozzle temperature: 220°C for all layers - use a CHT nozzle (e.g. ALI-Express), do not print faster than indicated, print slower if you do not have a CHT! - Print bed temperature depending on heating quality 55-60°C Don't be sad if it doesn't work with the normal 0.6 nozzle. I have never tested it! After one hour you will have a unique lampshade. With one spool you can create 6 shades with the specifications. Give the lamp with socket and a smart light bulb as a gift. The filament is also very nice for sculptures, vases and poker chips. Keep it simple!