About this 3D model

Printed at .15. in black PLA, 5% gyroid infill. Drill a 1" hole in the bottom for a pour spout, fill with plaster for weight (2 parts plaster, 1 part water) Finishing: Lightly sand rough edgesGive it 3 coats of black primer until the layer lines are gone. 15 minutes dry between coats.Oil rubbed bronze acrylic spray for the base coatSpanish gold rub and buff for the bodySilver leaf rub and buff for the shellLiquitex paint pen, Mars Black, for the hoodClear coat for UV protection I put mine on the front porch for the sake of the postman.