About this 3D model

Woodstock Christmas Ornament It´s Cute. It`s Yellow (and Red). Hang on your Tree (Profile with Hanger) or use as Display (Profile with Base/Stand). 145x80mm approx. 5-Color Filament Painting. AMS-ready for one AMS. Important : Please change your Filament in AMS-Slot 1 to White after Black completely finished printing (both Profiles). For Use without AMS: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Dark Red At layer #13 (1.12mm) swap to Orange At layer #19 (1.6mm) swap to Lemon Yellow At layer #26 (2.16mm) swap to Ivory White for the rest. For Profile 2: Please print the Base/Stand on Plate 2 in White. Have Fun and Happy Printing!