About this 3D model

This poop box incorporates a built-in stop arm; after installation, simply align the arm against the machine's left panel to perfectly position it over the waste chute—supremely convenient Important Note: If you elevate the machine, ensure you raise the poop box accordingly; otherwise, functionality may be compromised. The model's assembly utilizes hot-melt nuts, requiring a soldering station. If you lack one, we strongly advise employing the threaded screw installation version linked below, eliminating the need for a soldering station: https://makerworld.com/en/models/71749 Recommended Print Settings 3 bottom layers, 3 top layers, 2 walls, 20% cubic infill Required Accessories: 1. Four 6mm diameter, 3mm thick circular magnets 2. Two M3 x 4 x 5 hot-melt nuts 3. Two M3 x 8 countersunk screws Refer to the images below for precise hot-melt nut and screw specifications: Hot-melt Nut Reference Screw Reference Mounting hole locations: Magnet Mounting Locations Pressing Hot-Melt Nuts into the Stop Arm using a Soldering Station Finally, secure the stop arm with screws ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ If you have extra magnets, consider printing a fidget toy I designed. Click the image below to access details: Click the image to access the page