About this 3D model

Wolfman 1941 It Bites! Lon Chaney (and Claude Rains) 4 Color Filament Painting in almost 3D AMS-ready Easy without AMS: Profile/STL One, as shown in Picture 1-3: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Tough Cream White Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Beige At layer #17 (1.44mm) swap to Cream White At layer #29 (2.4mm) swap to Ivory White for the rest. Profile/STL Two, without Frame/Title (Picture 4-6): Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Tough Cream White Transmission Distance: 10 Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Beige At layer #20 (1.68mm) swap to Cream White for the rest. You will get away with 2 Colors (Black-White) on this one, will look just slightly different.