About this 3D model

Hey everyone, I have designed a collapsible dice tower that pulls up and rotates to lock into place. Each piece can be printed separately and assembled. It was a fun piece to design and I hope you guys get some use out of it! There is a thin walled and a thick walled version available for download, personally I printed the thin walled but some of the walls are very close to 0.4mm so your printer and settings need to be perfect to print it. If not, I would recommend the thick walled version, either way it should function the same and collapse to nearly the same size. Note: this is not the easiest print as the clearance between each piece is approximately 0.8mm so make sure your printer is well tuned before attempting this. Second note: some people have reported issues with PruseSlicer when preparing the thin walled version for printing. It seems that Cura handles the inclusion of 0.4mm walls better than the PruseSlicer does. I have redesigned the pieces so that they have thicker walls and uploaded a version of the model with this fix.