About this 3D model

Ornament for light chain I created ornaments with family photos (lithophane) that attach to a light chain. I planned to add a few to the light chain each year. Ornament with an iced tea light candle I also created a second model so that the ornaments could be used on their own without the light chain. A 35mm or 38mm diameter led tea light candle will provide the light for the ornament. !! I haven't had a chance to print the candle version yet. I cannot guarantee the quality of the model. I will try to provide photos or improvements as soon as possible (as soon as I am released from the hospital). Litophane Maker url: https://lithophanemaker.com/Lithophane%20Tag.html Printing settings The ornament itself is printed without supports. Since the lithophane is printed in portrait, you will have to secure it with supports. The lithophane has a diameter of 60mm, but it is better to use 59,6mm values. Ornaments: material: PLA/PETG wall-count: 2 infill: 10% layer-height: 0.15 Litophane: material: WHITE PLA infill: 99% layer-height: 0.12 Instructions for assembling the ornament and preparing lithophane photos. Ornament for light chain First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the second lithophane into the groove on the outside of the ornament Step 3: Insert the light chain bulb into the hole in the ornament. Place the fuse on the light chain wire and insert it into the hole. Pull the light chain back a little. First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the hook holder from the inside Step 3: Insert the hook Step 4: Light and insert the iced tea light Step 5: Insert the second lithophane into the groove on the outside of the ornament Circular Lithophane Maker is used to create lithophane https://lithophanemaker.com/Lithophane%20Tag.htm For greater lithophane strength, set at least a 2mm frame. Insert a photo and set values similar to the picture... Litophane is printed vertically