About this 3D model

Remixed the great model from UnimatrixRed. Gears trimmed by .64mm for easier assembly Center windows painted for multi-color Center windows use Concentric top layer for appearance Assembly: Insert gear A into core half 1 with the gear "notch" aligned to any point of the triangle on the outside of the core half. Press a corner pyramid on to the gear shaft. This will help keep the gear in the correct position during assembly. Work around the core half with remaining 3 gears, alternating gear types A & B. The same gear types should never touch each other. Core half 1 has a recess for a 6x2mm magnet. Be sure to use the corner pyramid with the matching magnet recess in this location. Repeat steps 1-3 with core half 2. Glue magnets into core half 1 and matching pyramid. When you've verified that each core half works smoothly, glue triangle windows to the core and then the pyramids to the gear shafts. Glue the 4 alignment pegs into one completed core half. Place the second completed core half together with the first, using the pegs for alignment. If the pyramids are not aligned, rotate one core half by 90 degrees and re-assemble. Glue the core halves together with the pegs. Glue the pyramid windows, center windows, and frame windows into place.