About this 3D model

The print profile is scaled to 75% for a 75mm diameter top and 92mm height. You can scale overall or just X+Y or Z axis as you like. You can also cut and remove some at the top to make it more stubby. The wall thickness is determined by the outer wall line width profile setting (0.8mm in this profile). The profile is for a 0.6mm nozzle, however, it will print fine with a 0.4mm nozzle installed (the example was printed with a 0.4mm nozzle). Overall print time is limited by the filament profile Cooling|Part cooling fan|Max fan speed threshold|Layer time setting and the Cooling|Part cooling fan|Slow printing down for better layer cooling option. You can try reducing the Layer time to speed up, but, problems will become more apparent at the end of the print. I recommend printing in PETG or PA for strength and chemical/water resistance.