About this 3D model

This is a funnel designed to sit at the top of a moss pole for gravitational watering. Designed to pour straight from the top, through a narrow tube with many alternating holes to spread out the distribution of the water inside the pole. Works best with poles without a solid supporting center. The style of the moss pole featured in the photo is inspired by SydneyPlantGuy on YouTube, just using sphagnum moss inside of a wrapped wire mesh frame. No need to water the dirt, as gravity will do the work to moisten the moss and trickle its way down to the dirt, in turn promoting a well-established plant throughout the pole. Changelog Funnel v1 20/11/23 Original launch Funnel v2 09/09/24: Lengthened and added a curve to the mouth of the funnel to boost water capacity and aesthetics Inset the lip of the mouth to promote better bed adhesion and also to keep water from flowing out as much at the top Slightly thickened the design for strength Moved the location of the holes in the spout to improve printability Added 4 holes at the base of the mouth, for downward streams designed specifically for moss pole purpose Added FoenOntwerp name to inside of mouth lip Thanks for printing! Support me here - buymeacoffee.com/foenontwerp https://ko-fi.com/foenontwerp