About this 3D model

Use my print profile for best results, I cannot guarantee print profiles by others. Here are 18 different Christmas ornaments that print really fast: under 2 hours for each plate of 9 ornaments. Only 3 filament swaps total per print. Two different build plates. The 3mf file has all the filament changes built in. Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #7 (1.4mm) swap to Scarlet Red At layer #12 (2.4mm) swap to BambuLab Green At layer #19 (3.8mm) swap to Ivory White for the rest.