About this 3D model

Print 1.stlCut the carbon fiber (add some margin)Strecth it and cover the face (I used hot air gun)Repeat this process 4 timesGlue them together with transparent epoxyBuy a 300x300 white light emited plexgilasCut the plexiglas (I used ~12cm nickel cabel and 12v adapter)Make sure no light escape from carbon fiber (I used painter tape)Print 2.stl (ABS or HTPLA)Buy LED filament lamp (make sure not getting hot)[2.stl required 200x300 printer or you can use wood etc.]