About this 3D model

Description My hose drum hanger broke recently. Unfortunatly the product is obsolete, so I made a replacement. I recommend to print this in PETG, as it is less temperature and UV-light sensitive. You might want to fill the inside with 10% fill to eliminate overhangs. I didn't yet test print it, as I'm waiting for PETG filament. I'll update as soon as I get it. Hardware You will need: 4 x M8 bolts for fastening it to the wall Ø20, L = 150mm pinion. This one can be printed, but it's preferable to have some soft rubber at the top. I just used the original one.