About this 3D model

iPhone 13 pro case Support the designer: Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241 I went through a few iterations to make this case perfect. There's a few features that make it really good: Buttons are all have a good click to them. No inconvenient holes, all buttons are covered, including the action button. The case has a tight grip on the phone, doesn't slide out easily. Camera bump guard is split from the case, so you can print it in different materials like PLA or TPU and different colors. Beautiful honeycomb pattern that makes for a nicer finish relatively easy to print without bulging or other critical problems Assembly: insert the camera bump guard first in the right direction Insert all 3 buttons finally insert your phone! How to print: TPU 95: a strong flexible filament is required for the case Camera bump guard can be print in TPU or PLA . Use supports on tight overhangs on the case like the buttons and speaker and port bridges. I recommend 15% infill , for better clickiness of buttons. If you want the cool effect to highlight the honeycomb pattern in a different colour, you'll need to add a stop at layer 2 and 3. This means you'll start with TPU , change to the other colour at layer 2 and revert to TPU at layer 3. Print 3 volume rocker buttons and 1 power button Update log: 2023-11-23: first version uploaded