About this 3D model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Esun Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Black until layer #7 at 0.64mm Red until layer #12 at 1.04mm Orange until layer #16 at 1.36mm White for the rest. Tested on Bambu Lab X1C-AMS