About this 3D model

I created a santa globe in a lithophane. This does not need supports. I used a raft and that was it. Up to you if you want a raft,Brim or none I loved how it turned out and thought i would share for others to make but not sell them. Santa Globe is the original one in photo's and the Santa Claus Globe is same but a different base. I printed up the Santa Globe. I hope you enjoy the print. Update- Settings to print this up. Printed with a 0.4mm nozzle, 0.1 layer height, 99-100% infill, Print speed 30 to 45mm/s. Build plate adhesion can be none/brim/raft and please don't add supports or you will have a hard time removing them from inside the globe. Select Super Quality :).