About this 3D model

14 different concrete highway barriers in Z scale, commonly seen along North American highways, roads and in parking lots. Some of the barriers are intended to interlock with the next creating a robust traffic barrier. Included in the files are barriers to transition from one height to the next, startig with 810mm (32"), dropping to 690mm (27"), and finally to 460 (18") which can be finished with a standard bullnose. Included with the 690mm tall barriers is a femal drain barriers which providse a large free area to allow surface water to drain off of the roadway. Included with the 810mm tall barriers are Pier Barriers (vertical on the non-traffic side), and bridge parapet barriers which are designed to tie the string of barriers into the guard rail of a precast concrete bridge. If FDM printing these you will most likely need to do a bit of sanding. Barrier styles included: N Parking Barrier - 2130 N Bullnose - 460 x 2500 N Barrier - 460 x 3050 N Transition - 690 - 460 x 2500 N Barrier - Female 690 x 2500 N Drain Barrier - Female 690 x 2500 N Barrier - Male 690 x 2500 N Transition - Male 810 - 690 x 1300 N Barrier - Female 810 x 2500 N Barrier - Male 810 x 2500 N Pier Barrier - Female 810 x 2500 N Pier Barrier - Male 810 x 2500 N Std Bridge Parapet Left - 810 x 2000 N Std Bridge Parapet Right - 810 x 2000 In Addition the following variants are included without the male / female interlock tab or pocket to aid in FDM print output: N Barrier - No Interlock 810 x 2500 N Drain Barrier - No Interlock 690 x 2500 N Pier Barrier - No Interlock 810 x 2500 N Std Bridge Parapet Left - No Interlock 810 x 2000 N Std Bridge Parapet Right - No Interlock 810 x 2000 N Transition - No Interlock 690 - 460 x 2500 N Transition - No Interlock 810 - 690 x 1300 N Barrier - No Interlock 690 x 2500