About this 3D model

Intro After designing a GoPro Hero 10 battery case I made a hollow version to use as small parts storage or organizer. I find it very useful for my EDC and work-related things I need to store somewhere. Choose the right size for you! I made 3 different sizes, for now, to choose from. I'll upload different box sizes if you need to have one. Small ( Internal dimensions: 80mm x 42mm x 16.5 mm ) Medium ( Internal dimensions: 90mm x 55mm x 15 mm ) Large ( Internal dimensions: 90mm x 55mm x 25 mm ) I also made a box for 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!! Made by Lumanieri , a really great tool to have every time with you! Check it out! ( https://www.prusaprinters.org/social/102193-lumanieri/prints ) ( https://www.prusaprinters.org/prints/88474-14-hex-bit-ratchet-wrench-tool-and-fidget-toy ) Print Settings I almost always use standard settings as a starting point and tweak some parameters based on the filament I use or the characteristics I need from the final print. There is no need for support on this print. Additional Materials For this assembly, you will need some kind of metal rods with a diameter of around Ø 2mm and a length of 20 mm. You can use a wire, plastic rod, or even m2 screws. The idea is to make a point of rotation for the hinges on the box. Filament is also a good solution, you can cut the right length and then block the filament by melting both ends. Assembly The assembly is pretty straightforward. Use the image I uploaded which illustrates step by step how to put everything together.