About this 3D model

This is a compatible insert for the L-Boxx system in size 2x1 (104mm x 52mm). The height is 60mm (62mm incl. feet) which is the standard height for L-Boxx 102 inserts. The design has feet (which prevent the insert from sliding in the L-Boxx when the L-Boxx is only partly filled with inserts. The design is also moderately stackable. I will publish different sizes of this design, or alternatively feel free to use my Fusion360 model or step file to improve or extend the design range. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Colorfabb PLA white Notes: Nozzle diameter 0.4mm Layer thickness 0.2mm Printed with a wall thickness of 1.5 (= 4 walls). Top and bottom printed with a thickness of 1.6 I used the experimental "tree support" option in Cura. Only very little support is needed (just the first 2mm) and the tree support is extremely easy to remove. I highly recommend using the experimental tree support setting. Print speed 100mm/s Post-Printing The tree support can easily be removed using a putty knife. How I Designed This I designed the model with the help of Fusion 360. Category: Tool Holders & Boxes