About this 3D model

I recommend printing from PETG or ASA material. Print resolution: 0.20mm - 0.30mm Filling: 20-30% The following screws are required for assembly: For fixing the bottom and pillars: 4 pcs Imb M4 × 25mm including nuts For fixing pillars and roofs: 4 pcs Imb Button M4 × 16mm including nuts For fixing the wedge and roof: 6 pcs of recessed M3 × 12mm including nuts For mounting the placard: 1 pc recessed M3 × 12mm including nuts For mounting element for mounting the camera: 1pc recessed M3 × 30mm and 2pcs Imb Button M3 × 6mm Insert 4 pcs of M5 nuts into the bottom to attach the holder For the bird feeder, I offer two holders, which are designed for mounting on a pipe with a diameter of 50mm. For mounting the upper holder: 4 pcs Imb M5 × 10mm For mounting the side holder: 4 pcs Imb M5 × 10mm and 4 pcs Imb M4 × 20mm for mounting sleeves including nuts