About this 3D model

My first 3d Drawing after 2 goes at Fusion 360, happy to share with others that may be interested or have ideas for it. i will be adding things over time, if the interest is there. be sure to hit me up for more info if needed. Printer CR-10 v3 I'm using Chep's Printing settings with slight adjustments to my personal experiances and likings Dimensions: Roughly 240mm wide by 100mm high suitable for a 10mm or 11mm screen thickness 0.20mm print Print speed 60mm/s Print temp: 200c Bed temp: 50c Infill: I did 75% on this i think but have done with 35% with the same results Infill pattern: Traingle (my preference) Supports: On everything Made on Fusion 360 Raft: Yes for me, I personaly like the added security of the raft, base of the print finish and keeping it stuck to bed during buildtime. It is your choice (im not really good without the raft for some reason) Plastic: Pla+ Esun... Plan to so this in ABS soon enough This was built as my shower does not have very much storage and so far this is covering some aspects of storage (will be adding more to it) It just simply hooks over the top of my shower screen (Bone White print) Let me know your thoughts!! Hope it's usefull to some