About this 3D model

Here you can find my Christmas Rope Bauble Ornament Collection. There are different Designs: Two ropes - single color Two ropes - dual color Four ropes - single color (only the rope, if your printer is able to print it without the sphere inside) Four ropes - dual color Ten ropes - single color (only the rope, if your printer is able to print it without the sphere inside) Ten ropes - dual color I´ve printed the Two ropes - single color version with 3 perimeter, 0.2mm layer height and 20% lightning infill. The filament is Prusament PLA Blend Viva La Bronze and i printed it on my CR10-V2 with 215° nozzle and 50° bed temperature. I used tree supports at angle higher then 60 degree. You will need some supports because of the rope geometry which creates a lot of overhangs. I have only a single color printer, so hopefully someone with a multi color will share a make of the dual color versions. Would be happy to see your makes! Boost Me If you like it, please Boost! ? It really helps creators.