About this 3D model

Want to show off your 3d printing hobby to your neighbors? What better way than decorating your car with this ornament! The included model is a 7.5 by 11cm car ornament with the text "My other car is 3D Printed". If you'd like the ornament to be larger, you can scale the model in the X and Y dimensions in the slicer. Hooks The hooks are designed to fit suction cups with an 8mm "slot", but you can also use suction cups with hooks if preferred. Multi-Color Slicing The model can be sliced to achieve a multi-color print, as pictured. Configure your slicer to pause the print the following heights to allow you to swap the color of the filament:- 1mm (load the color for "My other car is")- 1.8mm (load the color for "3D Printed") If you scale the model in the Z dimension, keep in mind that you need to adjust the pauses for reloading the filament as well. NOTE: If you are printing with PrusaSlicer, you'll need to insert the pauses *after* the noted heights, so at 1.2mm and 2.0mm respectively for it to print correctly.