About this 3D model

The airplane head is sharp, please pay attention to safety when launching, keep away from people and objects!! The rudder of the paper airplane is adjustable, the hinge thickness is 0.32mm, gently bend it can stay at any angle, adjust the rudder to improve playability. If you need to adjust the rudder angle, just cut the connection point between the rudder and the fuselage. Please print with 100% infill to ensure the center of gravity is correct. Different printing materials may cause slight changes in the center of gravity, but the impact is not big. When printing the airplane, increase the flow rate slightly to ensure the printing strength of the wings, preventing the lines from sticking together (when I print with PLA, the flow rate is 99%). The way to hold the launcher, please see my picture, to prevent hitting the hand. If you need to hold the launcher with your left hand, mirror print the launcher. Paper airplane printing parameters: 100% infill 0.4 nozzle, first layer 0.2, layer height 0.12 If using X1C, it is best to turn off the auxiliary cooling.