About this 3D model

These are X and Y axis adapters for installing the FYSETC Portable Input Shaper to the Anycubic Kobra Neo. For the X axis test, screw the accelerometer into the adapter using 2 M3x8 bolts. Remove the blue cover around the printhead and use the existing bolts to install it (behind the printhead). After running the X-axis test, remove the accelerometer. Print the Y axis adapter onto the center of your bed, keep the heatbed warm, and screw the accelerometer into it using 2 M3x8 screws. Keep the bed heater on while you run the Y axis test. Supports needed when printing the x mount.