About this 3D model

Failed to feed the filament into the toolhead FIX I have found out that the issue for me was a slight bent where filament goes into the PTFE coupler on the back. This simple print straightens the tube just enough (about 15mm) to make it go in smoothly. Printing instructions Print in any material that you see fit, personally I went with PLA I already pre-supported the file (added custom “brims” that you can easily peel away) You need three zip ties - there are files for 3,4 and 5mm thick ones I have been using this with this mod - https://www.printables.com/model/454595-bambulabs-x1c-ptfe-bracket-extended-version Please, do give me a feedback if it helped you! My Twitter :) In case you have any requests, feel free to send me a message and I will try to help you out!